Home > Technical Application > FAQ

Technique Document Download

R&D Fruitful Results、Award、Patent

FAQ

All categories

Due to HW consideration, (it is desired to shrink the Board Size to 38x38), therefore it is desired to remove one of the two DDR2 ram (i.e. change it to 128M), but how to do the setup?

Run-away of parameter settings occurred after switching power on/off continuously for many times.

What voltage should be applied to the Kernel of SCALER for 7100P?

It is mentioned in the Hi3511/3512 datasheet that it supports the one way SMPTE296M 720P 16 bits,The question is, whether the 16 bits should be connected to VI0 & VI1 or to VI0 & VI2? or both are applicable? Is there any reference circuit? Is there any special parameter to be setup for the diver loaded onto the software?

Question regarding whether Hi3511 BGA has a working temperature curve?

Question regarding the phenomenon of Video channel jumping problem when matching Hi3511 with tw2864?

Why is there abnormal sound when using ADPCM (IMA) audio coding?

Under the CBR mode, the bit-rate fluctuations are large and difficult to control?

The question regarding how to solve the problem with the optical fiber model that causes the network unable to work normally when using RTL8201 with Hi3511/Hi3512?

The question regarding the sequence of turning on power of Hi3511/Hi3512?

　　

1　2　3　4　5　6